Please double-check the size. 15 × 100 mm is a rare front axle standard.
Get notified as soon as it can be ordered.
Leave your email address. We will write to you once, as soon as this version is available. No newsletter.
Used only for this notification. Privacy policy
PRIMARO is the hub our road wheels started with. In its second generation, the drive-side flange of the rear hub sits further out. The spoke angle gets flatter, and the wheel becomes stiffer laterally and calmer under load.
The M4 version takes threaded carbon spokes directly in the flange, with no nipple at the hub. It is one of the lightest ways to join hub and spoke, and the basis for low spoke-count builds.
Inside sits the NonPlus Conical Ratchet System. Its conical teeth spread drive torque over a large contact area, which keeps wear low and engagement clean. NON PLAY sets the bearing preload by itself. NON VACUUM equalises pressure inside the hub and keeps moisture away from the bearings. NON GAP protects the bearings with a micro gap at the end caps instead of dragging seals.
Machined and assembled by hand in Winnenden, Germany. Hub, axle and end caps carry a 4-year warranty.
- Use: Gravel, Road, Cyclocross
- Maximum system weight 130 kg (rider, bike and luggage)
- Disc brake, mount Center Lock
- Approved for e-bikes
- Made to order in Winnenden
- Road and gravel with thru-axle
- Front 12 × 100 mm or 15 × 100 mm (selectable)
- Rear 12 × 142 mm
- Center Lock brake rotors
- E-bikes up to 60 Nm motor torque, not with Shimano HG freehub
- Front hub and rear hub
- Freehub body in the selected standard
- End caps fitted
The numbers.
General
- Intended use
- Gravel, Road, Cyclocross
- Hub set weight
- from 204 g
- Front hub weight
- from 63 g
- Rear hub weight
- from 141 g
- Hub shell material
- Aluminium
- Max. system weight
- 130 kg
- E-bike approval
- Yes
- E-bike: max. motor torque
- 60 Nm
Interfaces
- Axle standard front
- 12 × 100 / 15 × 100 mm
- Axle standard rear
- 12 × 142 mm
- Brake mount
- Center Lock
- Freehub system
- NonPlus Conical Ratchet System
- Freehub body (cassette)
- Shimano HG, Shimano Microspline, SRAM XDR, Campagnolo N3W
- Max. spoke tension
- 1.200 N
- Max. spoke tension rear (24 holes)
- 1.300 N
Listen.
This is what the freehub of a NonPlus hub sounds like.
PRIMARO ULTRA M4 in the AERO65 ULTRA. Spin it once and watch it run until it stops.
Technology you don’t feel.
- NON PLAYSelf-adjusting bearing preload. No readjusting, no play.
- NON VACUUMSealing that keeps dirt and water away from the bearings.
- NON GAPEnd caps with a micro-gap against friction and ingress.
Manuals & documents
One manual for every NonPlus hub. Read it before installing and riding.
Talk to us before you order.
We check frame, freehub and riding style and tell you which wheelset or hub fits.
- 4-year guaranteeon hub, axle and end caps
- Crash Replacement50 % off replacement, 2 years
- Handmade in Winnendenassembled and tested
- Wheel Specialistpersonal advice
