Please double-check the size. 15 × 100 mm is a rare front axle standard.
New 3-bearing freehub for MS and N3W on MTB hubs: it only fits the new axle with a continuous diameter. Please check your axle first. If you have the old axle with a step, order the new axle as well.
To the axle →
Compatibility
Unsure? Ask the Wheel Specialist →
Fits.
- NonPlus rear hubs
- SRAM XDR, SRAM XD
- Shimano HG Road and MTB, Shimano Microspline Road and MTB
- Campagnolo N3W
- Shimano HG MTB is not approved for e-bikes.
In the box
In the box.
- Toothed disc
- Bearings in Highspeed steel, Enduro steel or ULTRA Ceramic Hybrid
- Seal
- End cap
- 2× O-ring
- Shims 0.1 mm, 0.15 mm and 0.2 mm
How it works
Manuals and videos →
In drei steps.
- Pull off the end cap Pull off the drive-side end cap with the End Cap Remover Tool.
- Swap the freehub Pull off the old freehub body and push the new one on straight.
- Fit the end cap Press on the matching drive-side end cap and check that the freehub spins freely.
For the same work
What you need.
Factory service
Rather have us do it?
Bearing replacement, freehub cleaning and technical inspection in Winnenden. Return shipping within Germany included.
Book hub service
Does it fit?
Which part for which hub?
Bearings, end caps and freehubs differ depending on model and axle standard. Send us the model and year of manufacture, and we’ll tell you what fits.
Ask the Wheel SpecialistDownloads
